FCTG Series (12V) Front Access Lead Acid Gel VRLA Battery
As a well renowned front access lead acid battery manufacturer in China, Yubsb offers the widest selection of front access AGM batteries and gel VRLA batteries. The gel technology has numerous superiorities over the equivalent AGM battery range, especially for telecommunication applications. The FCTG type front terminal battery comes with long lasting design life and front access connections for fast, easy installation and maintenance, and is ideally suitable for telecom outdoor equipment, renewable energy systems and other severe environments.Get a custom quote
Long Design Life
The use of heavy-duty lead-calcium alloy grids with anticorrosive constrution enables the YUBSB Batteries to remain in float service for 10 years.
High Energy Density
YUBSB has been improved to bring about 15% higher energy density (wh/I , wh/kg) than comparable batteries at long duration discharge helping to design equipments to be smaller, lighter and more cost effective.
NO electrolyte leakage will occur from terminals or case ensuring safe and efficient operation.
The maintenance free battery boasts outstanding service performance and over discharge recovery ability.
Gas Pressure Venting System
Efficient venting system can automatically release excessive gas when the pressure rises above the normal level and reseal the valves when it returns to the normal rate.
NO Free Acid
Gas recombination technology brings super high seal reaction efficiency. Therefore, no acid mist will be separated out and environment is thereby protected.
NO Equalizing Charge Required
With the good coherence of internal resistance, capacity and floating charge , there is no equalizing charge required during use.
YUBSB is equipped with anti-explosion device which improves safety.
Designed Service Life And Operating Temperature
|Series||Designed service life(20°C)||Discharge||Charge||Storage|
|FCTG Series||10 Years||-25°C~55°C||-10°C~40°C||-20°C~40°C|
|Models||Nominal voltage (V)||Capacity (Ah)||Overall dimensions (mm)||Weight (kg ± 3%)||Terminal||Layout||Bolt|
Position Of Terminals