PC1500A 50D Series PWM Solar Charge Controller (50A)


Advantages of product:

  • Vivid LCD graphic symbols
  • Simple button operation
  • Automatic identification of system voltage level
  • Intelligent PWM charging mode
  • Adjustablecharge-discharge protection
  • Automatic temperature compensation
  • Settable operation mode of load
  • Battery reverse-discharge protection
  • Battery low voltage disconnection(LVD)
  • Battery reverse connection protection
  • Overcurrent protection
Get a custom quote

Overview

This intelligent ,multi-purpose solar charge and discharge controller has a very friendly interface of fixed LCD display .Various control parameters can be flexibly set ,fully meet your various application requirements.


PC1500A 50D Series PWM Solar Charge Controller (50A)

LCD/LED Display Information

  1. PV array positive terminal; PV array negative terminal
  2. Battery positive terminal; Battery negative terminal
  3. The load positive terminal; The load negative terminal
  4. LCD display
  5. Button Operation Operation
    + Short press Next display page;Increase when setting parameters
    Long press ( ≥3 s) Increase value continuously when setting parameters
  6. Button Operation Operation
    Short press Previous display page; Decrease when setting parameters
    Long press ( ≥3 s) Reduce value continuously when setting parameters
  7. Button Operation Operation
    Short press Switch on/off load ; Enter setup/save parameters
    Long press ( ≥3 s) Access/exit secondary loop interface

Specification

ModelPC15A 50D PC15A 5048D
Input
PV voltage≤50V≤100V
Rated current50A50A
Output
System voltage12V/24V (Auto)48V
HVD16.00V×1/×2/×4
Rated current50A50A
No-load loss≤14mA≤16mA
Charge loop voltage drop≤0.22V≤0.25V
Discharge loop voltage drop≤ 0.12V≤ 0.12V
Charging modePWM 4-stage(bulk, absorption,float, equalized)
Voltage of float charging13.8(13V~15V)×1/×2/×4
Voltage of absorption charging14.4V(13V~15V) ×1/×2/×4
Duration of absorption charging2hs
LVD10.8V(10V~14V) ×1/×2/×4
LVR12.6V(10V~14V) ×1/×2/×4
Load working modeRegular control mode
Load working modeLight control with switch-off point at night and switch-on point before dawn 
Load working modeLight control mode
Load working modeSelf-timing switch on/off mode
Light control voltage5V(1V~10V) ×1/×2/×4
Battery typeGEL, SLD, FLD and USr(default)
Other
ButtonsLCD, 3 buttons
Heat sinkAL alloy heat sink
WiringPCB terminal, ≤25mm
Working temperature-20 ~ +55 °C
Storage temperature-30 ~ +65 °C
Working humidity10% ~ 90%, no condensation
Dimension188 x 133 x 51.5 mm
Net Weight595g600g
IP gradeIP30
Optional functionRemote communication,TTL, standard ModBus protocol 
AccessoryTemperature sensor


Related Products