PC1500A 30D Series PWM Solar Charge Controller (30A)


Advantages of product:

  • Vivid LCD graphic symbols
  • Simple button operation
  • Automatic identification of system voltage level
  • Intelligent PWM charging mode
  • Adjustablecharge-discharge protection
  • Automatic temperature compensation
  • Settable operation mode of load
  • Battery reverse-discharge protection
  • Battery low voltage disconnection(LVD)
  • Battery reverse connection protection
  • Overcurrent protection
Get a custom quote

Overview

This intelligent ,multi-purpose solar charge and discharge controller has a very friendly interface of fixed LCD display .Various control parameters can be flexibly set ,fully meet your various application requirements.


PC1500A 30D Series PWM Solar Charge Controller (30A)

LCD/LED Display Information

  1. PV array positive terminal; PV array negative terminal
  2. Battery positive terminal; Battery negative terminal
  3. The load positive terminal; The load negative terminal
  4. LCD display
  5. Button Operation Operation
    + Short press Next display page;Increase when setting parameters
    Long press ( ≥3 s) Increase value continuously when setting parameters
  6. Button Operation Operation
    Short press Previous display page; Decrease when setting parameters
    Long press ( ≥3 s) Reduce value continuously when setting parameters
  7. Button Operation Operation
    Short press Switch on/off load ; Enter setup/save parameters
    Long press ( ≥3 s) Access/exit secondary loop interface

Specification

ModelPC15A 30D PC15A 3048D
Input
PV voltage ≤50V ≤100V
Rated current 30A 30A
Output
System voltage 12V/24V (Auto) 48V
HVD 16.00V×1/×2/×3/×4
Rated current 30A 30A
No-load loss ≤13mA ≤15mA
Charge loop voltage drop ≤0.17V ≤0.28V
Discharge loop voltage drop ≤ 0.10V ≤ 0.10V
Charging mode PWM 4-stage(bulk, absorption,float, equalized)
Voltage of float charging 13.8(13V~15V)×1/×2/×3/×4
Voltage of absorption charging 14.4V(13V~15V) ×1/×2/×3/×4
Duration of absorption charging 2hs
Voltage of equalized charging * 14.6V(13V~15.5V) ×1/×2/×3/×4
Duration of equalized charging 2hs
LVD 10.7V(10V~14V) ×1/×2/×3/×4
LVR 12.6V(10V~14V) ×1/×2/×3/×4
Load working mode Regular control mode
Load working mode Light control with switch-off point at night and switch-on point before dawn 
Load working mode Light control mode
Load working mode Self-timing switch on/off mode
Light control voltage 5V(1V~10V) ×1/×2/×3/×4
Battery type GEL, SLD, FLD and USr(default)
Other
Buttons LCD, 3 buttons
Heat sink AL alloy heat sink
Wiring PCB terminal, ≤16mm
Working temperature -20 ~ +55 °C
Storage temperature -30 ~ +80 °C
Working humidity 10% ~ 90%, no condensation
Dimension 196 x 111 x 54 mm
Net Weight 400g 410g
IP grade IP30
Optional function Remote communication,TTL, standard ModBus protocol 
Accessory Temperature sensor


Related Products